Home  |  Products  |  Search  |  Discussion  |  Shopping Cart  |  Contact Us


Comments for: Turntable Mats

<<first | <previous | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | next> | last>>
Name: DaverJ
Message: What mat is recommended for a Audio Technica AT-LP1240-USB Direct Drive DJ Turntable?

Webmaster's reply: A 285mm-diameter Way Excellent II-4mm Turntable Mat. (but not for use as a slipmat or for record scratching).
Name: Mark
Message: What is the best platter mat for JVC L-A55. Thanks

Webmaster's reply: Way Excellent II-4mm Turntable Mat.
Name: Mark H.
Message: Any ideas for an early Sota Sapphire that has the glued on rubber mat? My tonearm, a 10" Helius Scorpio 4, has plenty of VTA adjustment. In fact, I'm currently bottomed-out with this arm and a Goldring 1042, so some increase in platter height would be welcomed. I usually run with a machined brass stabilizer of about 380grams.

Webmaster's reply: Most of our Sota Sapphire customers replace the stock mat with a full-size Way Excellent II-2mm Turntable Mat with excellent results. If your VTA is bottomed-out with a rubber mat, a thicker Way Excellent II-4mm mat would be appropriate to allow some VTA adjustment latitude. As an alternative, a Way Excellent II-2mm mat can be used on top of the stock mat with excellent results. Way Excellent II Turntable Mats are fully compatible with a 380-gram brass stabilizer.
Name: Vern Neal
Message: I have a Pro-Ject RPM 5.1SE table. Which is the mat for meC?

Webmaster's reply: Full-size Way Excellent II-2mm Turntable Mat.
Name: Nick Edwards
Message: Hi I have just bought a Sony PS-X70 which mat would you suggest? Loved the mat you sent through for my old Luxman PD 264 by the way!

Webmaster's reply: A full-size Way Excellent II-4mm Turntable Mat. (The 292mm-diameter Way Excellent II-4mm mat for the Luxman can be used with the PS-X70 just as well.)
Name: Bee Tee
Message: I have an 80s-vintage Harman Kardon T-45 turntable. The rigid rubber mat has become warped in storage. What replacement mat is the best match for this turntable? Thank you.

Webmaster's reply: A full-size (295mm-diameter) Way Excellent II-4mm Turntable Mat
Name: Yonatan Robaina
Message: Hello, I am putting on a mini mat in my CD drive Electrocompaniet EMC1, am impressed of the quality that magnificent reader can extract in the eastern part, now I believe that the mat will buy parz the record player pioneer that I have, PL-550, which me recomendaria? A greeting from the Canary islands .. and muchisimas thank you for his magnificent products...

Webmaster's reply: For PL-550, a full-size (295mm-diameter) Way Excellent II-4mm Turntable Mat.
Name: John
Message: Hi, which mat and what size is the best for my Garrard zero 100? Thanks.

Webmaster's reply: As listed above, a 285mm-diameter Way Excellent II-3mm Turntable Mat.
Name: Tommy T
Message: Which mat would you suggest for a Technics SL-D2?

Webmaster's reply: 285mm-diameter Way Excellent II-4mm Turntable Mat.
Name: John Morrison
Message: You seem to recommend a Way Excellent II 4mm for Denon Turntables. The DP-1000 has a raised portion of metal in the center of the platter with about a 5mm radius. The original equipment rubber mat has a corresponding cut-out to accommodate this raised area and thus remain flat when installed. Will the WE II 4mm be able to accommodate this raised area also?

Webmaster's reply: For the DP-1000, you'll want a 4.25" center hole (center hole option is chosen from the Shopping Cart drop-down menu). The raised hub area has a radius of just over 50mm, not 5mm.
<<first | <previous | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | next> | last>>

-Post a comment-

Name:  

Message: 

smilies ]   [ custom formatting ] 

  

                        

Copyright © , Herbie's Audio Lab