|Home | Products | Search | Discussion | Shopping Cart | Contact Us|
Name: Yonatan Robaina
Message: Hi I have a Pioneer PLC-590, the rubber mat has a diameter of 306mm and 5mm thick, which would be recommended for this dish? Thank you very much for everything, Yonatan
Webmaster's reply: A full-size (295mm-diameter) Way Excellent II-4mm Turntable Mat is recommended for the PLC-590. Being more efficient at isolation than the stock rubber mat, the Way Excellent II doesn't need to be quite as thick. If you cannot adjust VTA/tonearm height, then a Way Excellent II-5mm Turntable Mat would be most appropriate.
In the listing you show the 292mm mat for the Pro-Ject Debut Carbon. In the posted questions, you recommend the full size 295mm. I just want to confirm which one will work for my turntable. Thanks you.
Webmaster's reply: The Debut Carbon, with 300mm-diameter platter, does very well with a 295mm mat. However, with the slightly rounded and beveled outer edge of the platter, a 292mm mat fits a little more neatly on the platter. (Older posts recommending a 295mm-diameter mat have been edited to recommend a 292mm mat.)
Name: Jim Schabow
Message: I just picked up a Pioneer PL-518 direct drive table. What mat would you recommend?
Webmaster's reply: A 285mm-diameter Way Excellent II-4.5mm Turntable Mat is ideal for the PL-518.
I have a Dr. Feickert Woodpecker 2 turntable with the optional inertia platter. Which turntable mat and size is best for this turntable.
Thanks in advance!
Webmaster's reply: Full-size Way Excellent II-2mm Turntable Mat.
Message: Hi. i have a rebuilt AR XA with stock tonearm . what mat(way excellent 2) and do i need the stabilizer. thank you very much
Webmaster's reply: Full-size Way Excellent II-2mm Turntable Mat for AR XA. Most people find you don't really need a Stabilizer with the AR/Way Excellent II, but that's strictly a matter of personal choice/preference.
Name: Jim schabow
Message: What mat would be a perfect match for a Kenwood KD-2055 turntable?
Webmaster's reply: Full-size Way Excellent II-4mm Turntable Mat.
Message: Just received a Audio Technica AT-LP1240 turntable. Impressive turntable but for the thin "warped" Audio Technica turntable mat in the box. Any suggestion for a the mat to be shared between a Technics SL 1300 and the AT-LP1240? Looks like the tone arm height is adjustable on the AT. Thank you.
Webmaster's reply: A 285mm-diameter Way Excellent II-4mm Turntable Mat is perfect for both turntables.
Message: Which mat would you recommend for a vintage Kenwood KD-750?
And for an AR "The Turntable"?
Webmaster's reply: For the Kenwood, a 280mm-diameter Way Excellent II-4mm Turntable Mat. For the AR, a full-size Way Excellent II-2mm.
Message: What is the recommendation for Notthingan interspace?
Webmaster's reply: Full-size Way Excellent II-3mm Turntable Mat.
Name: Barry B
Message: Looking for a mat for my Technics 1600, AR -xa and a Phillips 312, what do you recommend
Webmaster's reply: For a single mat that can be used with all three turntables, a 285mm-diameter Way Excellent II-4mm Turntable Mat would be most appropriate. Otherwise, the AR-XA would use a full-size Way Excellent II-2mm Turntable Mat.
-Post a comment-
Copyright © , Herbie's Audio Lab